
● ISO 4161 / DIN 6923 Precision Standard • ● Thread Pitch, Socket Size (A/F) & Flange Dia
Applies to this nut 1. Thread & Pitch (M-Size)
Internal thread diameter & pitch (e.g. M6×1.0mm, M8×1.25mm, M10×1.25mm fine). Must match your mating bolt pitch exactly.
2. Socket Tool Size (s / A/F)
Measured across parallel flat facets (Across Flats – A/F) using calipers or sockets: M5 = 8mm, M6 = 10mm, M8 = 12/13mm, M10 = 14/15mm, M12 = 17mm.
3. Flange Base & Height (H)
Integrated washer flange (Ø D) spreads the clamping force across alloy swingarms and sprockets, preventing surface damage without loose washers.
💡 Practical Workshop Nut Sizing & Fitting Tips:
• Hand-Thread First: Always spin the nut onto the bolt by hand for the first 2–3 full turns before using tools to confirm the pitch matches smoothly.
• Fine vs Standard Pitch: Many motorcycle chassis, axles, sprockets, and calipers use fine pitch threads (e.g. 1.25mm on M10 or M12) instead of standard coarse threads (1.50mm / 1.75mm). Verify your pitch before tightening.

● ISO 9001 Standard • ● Length measured from under head to tip
Standard Bolts (Hex, Cap, Dome)
Bolt length is measured strictly from underneath the head/flange to the tip of the bolt. The head thickness is excluded.
Countersunk (CSK) Bolts
Countersunk bolts are measured overall, inclusive of the head, because the flat head sits completely flush inside the countersunk recess.
💡 Practical Workshop Measuring Tips:
• Thread Diameter (M-Size): Measure outside thread crests using vernier calipers. For example, 7.85 – 7.98mm indicates an M8 bolt.
• Thread Pitch: Distance between adjacent thread crests (e.g. M6 is 1.00mm, M8 is 1.25mm standard or 1.00mm fine, M10 is 1.25mm or 1.50mm).